1.Turn Off the ice maker by raising the wire signal arm.

2.Remove the filter by pushing on the end/face of the filter.

3.Slide the old water filter cartridge straight out of the housing and discard it.

4.Using the alignment guide, slide the new filter gently into the filter housing. Push the filter in slowly until you hear the first "click." Once you hear the "click" stop pushing and the filter should lock in place.

5.Turn On the ice maker by lowering the wire signal arm.

6.Press and hold the Water Filter button on the Ice & Water Dispenser control panel for three seconds. When the display changes from Red to Green, the status has been reset.

7.After replacing the water filter and in order for the ice maker to work properly, it is necessary to clear air from water filter tubing. Once ice maker begins making ice, allow the bucket to fill completely, then discard the first TWO FULL buckets of ice. It will take at least two days to completely fill the bucket on regular ice making mode or 1 1/2 days on fast ice mode.

It is generally recommended to replace your water filter every six months, but this may vary based on your water quality and usage. Always refer to the manufacturer's guidelines for specific recommendations.

We offer a wide range of filters compatible with various refrigerator brands and models. To check compatibility, you can:

• Refer to the product description on our website.
• Use the filter finder tool available on our site.
• Contact our customer service team with your refrigerator model number for assistance.

If your water filter does not fit correctly, please double-check the model compatibility listed on our website. If it still doesn't fit, contact our customer service team for resolution, including exchanges or refunds.